How to Reset Network Settings in Windows 10

Do you want to reset your network settings? On this, I will show a tutorial about how to reset network settings in Windows 10.

Being connected to the network is practically essential to be able to work from your computer because both the information and many programs require it. Some tasks can be done offline, but accessing extra features or certain information means having an internet connection on your computer.

If you talk about a computer, you probably have two possible options for having an internet connection, doing it through LAN or WiFi connection by a physical or virtual router. Sometimes you have both connected, but you can prioritize one over the other to make it work better.

Not all of your devices have Internet either because of their possibilities or because you do not have an associated rate. This is no longer a problem since, for example, having an internet connection on your computer would be enough. Then you will only have to create an access point to share your connection.

In many opportunities, you may have suffered problems with the network to which the equipment is connected, either WiFi or cable, sometimes through connectivity, stability, performance, among others. Even on your phone, you will have noticed that many times the activated 4G network itself falls from time to time. Some errors are easy to solve, but others are a bit more complex.

In Windows 10, you will find practical ways that allow you to reset network settings to their original state without affecting any parameter of the computer.

Remember that before resetting the network settings, you must exhaust all available options to solve the problem, whether it includes Windows 10 (Troubleshooting) or some external checking on your router.

Reset Network Settings in Windows 10

The first thing you must do is open the Settings on your Windows 10. To do this, open the start menu and click on the gear icon on the left side of it. That will open the main Settings menu.

Shortcut Winkey + I

reset network settings windows 10

Next, locate and click on Network & Internet. In the section Status, you can see a summary of your network and the different options and tools offered by Windows to control your connection, for example, the Firewall or the Troubleshooting.

reset network windows

To restart the network and delete everything related to it, all you have to do is click on Network Reset. Next, you will see a screen where it informs you of everything that the process will do and that your computer will restart to apply the changes correctly.

reset network

Click on the Reset now button and wait for the process to finish. In general, the process should not take too long, although you do have to wait for your computer to start again. When it does, before you can connect to the Internet again, you will have to configure your network just like the first time, just after installing your Windows 10.

As you can see, this option is very radical since it will erase all the configurations of the network, so I recommend using it only when there is no other alternative and try first with the excellent Troubleshooting tool that, in many cases, will suffice to solve your network problems.

If you face some problems using this method or you want an alternative method using the Command Prompt, check the next one.

Netsh Command to Reset Network Settings

These commands perform the same thing that the method above, which would reset the network settings of all your network adapters in Windows 10.

To use these command you need to open the Command Prompt as administrator. Each of the following commands performs a specific reset according to the needs of each one:

netsh int ip reset

This command resets and removes all the IPv4 settings that you have configured. It will be necessary to restart the computer so that the changes are applied.

netsh advfirewall reset

With this command, you restore the Windows Firewall policy by sending the default policy. It would leave all configurations that have been made in the Firewall to not configured.

netsh int ipv6 reset

This other command removes the settings you have made in IPv6 with this user. It will also be necessary to restart for the changes to take effect.

netsh winsock reset

This serves to reset the Winsock catalogue to a clean state.

With these commands, you can reset the network settings in Windows 10 in a simple, safe and efficient way.

If you have some problem in your WiFi network within your Windows 10 System, check out this tutorial and keep it handy because it includes a series of tricks so you can fix your WiFi connection and surf without problems.

Wrapping Up

As easy as that you can reset your network settings in Windows 10 using the Settings menu or even the Command Prompt (for advanced users). Have you been able to fix your problem? Let me know in the comments section.

Also Read: [Fix] Ethernet Doesn’t Have a Valid IP Configuration Error

Rating: 5.0/5. From 1 vote.
Please wait...

Leave a Reply

Your email address will not be published. Required fields are marked *